Winters Pro Eliminator Rear End Titanium Side Hat Stud Kit With 9/16 Hex Nuts
Are you looking at areas to improve your race car ??
With most of your main components on the car 9/16 hex these days we designed a 7/16 unf titanium nyloc nut with a 9/16 hex to suit and generally clean up this part of your car.
Imagine just finishing up your final adjustments with your 9/16 wrench and the ease of a quick bolt check of your side hat nuts.
If you like the sound of that well this kit is for you.
Kit consists of
9x 7/16 UNC/ UNF 2.415" long studs (Total length)
UNF length = 3/4"
UNC length = 1 1/4"
9x 7/16 UNF titanium jet nuts
Socket size = 9/16
Nut height = .560"
1x 7/16 UNC 1.000" long reduced hex with lock wire holes bolt
1x 7/16 UNC 1.250" long reduced hex with lock wire holes bolt
Note on installation PLEASE take note on the thickness of the side hat and nuts.
As the nut is taller than regular nuts you will need to make sure the stud has enough length out from the rear end housing for the nyloc nut to lock up.
We also recommend RED LOCTIE on thin titanium nyloc nuts.